Guides

10 Beginner Epoxy Mistakes (And How to Avoid Them)

1. Mixing too fastFast stirring whips in air. Stir slowly for three minutes and scrape the cup walls. 2. Wrong mix ratioEyeballing 2:1 kits leaves sticky resin. Measure by volume...

Epoxy Gift Ideas: Handmade Presents That Sell

Why resin gifts work Resin gifts look expensive, photograph well and can be personalised. For makers, they are also a low-cost way to test new colourways and shapes before scaling...

Woodturning with Epoxy: Bowls, Vases and Hybrid...

Why turners use epoxy Epoxy fills cracks, voids and bark inclusions so a fragile blank can be turned safely. It also lets you combine wood with pigments, coffee beans, pine...

Silicone Molds and Release Agents for Epoxy

Choosing a mold Silicone molds flex so castings pop out without damage. For coasters, jewelry and small castings, a thin silicone mold is fine. For deep pours, choose a mold...

Temperature and Humidity for Epoxy: The Ideal R...

The ideal range Most epoxy kits are formulated for 70–75F (21–24C) at 40–60% relative humidity. Inside that window the resin flows well, bubbles escape and the cure is predictable. When...

Epoxy Storage and Shelf Life: How Long Does It ...

Typical shelf life Most epoxy kits last 12 months from the date on the bottle, stored closed at room temperature. Deep pour formulas are similar. UV resin lasts 6 to...